Control Panel×セキュリティハウス - メーカー・企業と製品の一覧

Control Panelの製品一覧

1～9 件を表示 ／ 全 9 件

表示件数
Electric lock control panel, communication type random keypad model DM-110TK

Electric lock control panel, communication type random keypad model DM-110TK

This product, which combines a numeric keypad operation unit with a highly versatile electric lock control panel, is designed for ease of use in various locations.

■Basic design of the operation unit considering usability ● The position of the displayed numbers in the "operation unit" changes with each verification. (Fixed display available) ● Special film is used to prevent peeking from the side. ● Up to three types of PIN codes with 1 to 8 digits can be registered. ● The numeric keypad can connect up to two units, both inside and outside, to one electric lock control panel. ■Three operating modes of the electric lock control panel ● The operating modes can be selected from "Automatic Locking Mode," "Lock/Unlock Repeating Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the unlocking operation via the buttons on the main panel can be disabled by the panel lock function. ■Fire alarm linkage function In addition to continuous unlocking input, a fire alarm input is equipped. While the signal (no-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locking is linked to fire alarm recovery) ■Standard feature of unlocking prohibition input An additional contact signal input is provided to disable the unlocking buttons on the panel and external inputs. Unlocking operations can be prohibited in conjunction with security signals or tamper signal inputs. (Even during the unlocking prohibition, unlocking via fire alarm input takes priority.)

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-line electric lock control panel for 8 lines BAN-AS8

Multi-line electric lock control panel for 8 lines BAN-AS8

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected per electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-line electric lock control panel for 32 lines BAN-AS32

Multi-line electric lock control panel for 32 lines BAN-AS32

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks integrated with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (A mode) or repeated operation (B mode). ● Up to 5 operation display units can be connected per electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Electric Lock Control Panel DM-110K

Electric Lock Control Panel DM-110K

Standard electric lock control panel This is a standard electric lock control panel compatible with most electric locks from various manufacturers. (Also compatible with magnetic locks.)

■Three Operation Modes ● You can choose from three operation modes: "Automatic Locking Mode," "Repeated Lock/Unlock Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the panel lock function can disable unlocking operations via the buttons on the main panel. ■ Fire Alarm Link Function In addition to continuous unlock input, it is equipped with a fire alarm input. While the signal (non-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locks automatically in conjunction with fire alarm recovery.) ■ Supports Long-Distance Wiring Regardless of the type of electric lock, wiring is possible up to 150m (φ0.9mm-3P). (When the main unit is powered by AC100V.) ■ Standard Equipped with Unlock Prohibition Input An additional contact signal input is provided to disable the panel's unlock button and external inputs. This allows you to prohibit unlocking operations in conjunction with security signals or tamper signal inputs. (Unlocking via fire alarm input takes priority even during the prohibition of unlocking.) ■ Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), Miwa Lock's operation sub-devices: SSP-C1D, SSP-C1E, etc., can also be connected.

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Electric Lock Control Panel (Single Line Power Failure Compensation Type) DM-700

Electric Lock Control Panel (Single Line Power Failure Compensation Type) DM-700

High-performance 2-wire electric lock control panel

■Power Outage Compensation The external power supply is DC12V500mA with ample capacity, and it has a built-in power outage compensation circuit that lasts about 30 minutes, allowing for the connection of a keypad, card switch, and even a fingerprint verification switch. ■Compact Adapter with Two-Wire System The main electrical control panel is connected to the included two-wire electric key adapter using CPEVφ0.9-1P or AEφ0.9-2C. ■Control Output with Voltage-Free Relay Contacts State outputs for door opening, unlocking, and temporary unlocking are provided via voltage-free relay contacts. It can be directly connected to security transmitters or automatic reporting devices. ■Abnormalities in Electric Lock Indicated by Alarm If the door is left open abnormally for a set time, or if there are issues such as forced entry or disconnection in the electric lock, it will be indicated by an LED and an alarm buzzer (volume adjustable), and the alarm output (voltage-free relay contacts) will also be activated. ■Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), operation sub-devices from Miwa Lock, such as SSP-C1D and SSP-C1E, can also be connected.

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-line electric lock control panel for 4 lines BAN-AS4

Multi-line electric lock control panel for 4 lines BAN-AS4

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with an indicator lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation displays can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-line electric lock control panel for 16 lines BAN-AS16

Multi-line electric lock control panel for 16 lines BAN-AS16

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with a display lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation display units can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Multi-line electric lock control panel for 24 lines BAN-AS24

Multi-line electric lock control panel for 24 lines BAN-AS24

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with an indicator lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (A mode) or repeated operation (B mode). ● Up to 5 operation displays can be connected per electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with a JEM-A terminal for easy connection to HA systems. ● In the event of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

  • Entrance/exit management and personal identification system

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Heater-equipped infrared beam switch control panel DSHC-11

Heater-equipped infrared beam switch control panel DSHC-11

Heater-equipped infrared beam switch control panel capable of operating in ambient temperatures down to -25°C.

■Usable ambient temperature supports down to -25℃ This is a control panel for an infrared beam switch with a heater that can be used as a supplementary light beam to prevent pinching in automatic doors and shutters in cold regions and freezing warehouses. ■Heater-equipped sensor unit The waterproof heater-equipped sensor unit reduces malfunction due to condensation and fog in freezing warehouses, as well as ice formation and snow accumulation in cold regions. ■Power supply voltage supports a wide range The power supply voltage supports a wide range of AC100 to 200V. ■Detection distance The detection distance is up to 10 meters. ■User-friendly design ● By adding the optional sensor unit BS-10NH, it can support dual light beams. ● The wiring code for the emitting side is 15m, and the wiring code for the receiving unit is 10m, allowing the sensor connection code to be cut to fit the installation environment. *The sensor unit is sold separately.

  • Security Sensor Systems
  • Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Control Panelに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.